Sale Off
Compass MG-36Pro Miter Gauge - Harvey Woodworking

COMPASS MG-36Pro

Miter Gauge


€339,00€279,00

* Flat Rate Shipping $499.00 (US lower 48 states)

* Tax and shipping freight will be calculated at checkout


COMPASS MG-36Pro Miter Gauge
Essential to every table saw owner is an accurate miter gauge. Unfortunately, most stock miter gauges are either too sloppy or so poorly made that repeatable cuts are next to impossible.

With these failings in mind, our engineers designed the COMPASS MG-36Pro Miter Gauge. In comparison to the previous MG-36, the brand new MG-36Pro introducesseveral enhancements to elevate your woodworking experience , including the Extended Miter Bar, the precision Vernier Scale, the newly designed Miter Bar Fitness Adjustment Mechanism, and an Elbow Joint to the Flip Stop. The MG-36Pro is a tool you can trust and you will achieve your intended results which not only saves precious time, but saves you money by eliminating mistakes. And perhaps most important, the MG-36Pro is simply fun to use!

Features and Benefits

* 11 Positive Stops and Smart Trigger Lock

* 22'' Extended Miter Bar with Newly Designed Fitness Adjustment Mechanism
* New Vernier Scale Achieves Miter Angular Accuracy
* Micro-Adjustable Flip Stop with Unique Elbow Joint
* 36" Crosscutting Fence
* Premium Materials and Craftsmanship

Unbeatable Miter Angular Accuracy

Unlike any other miter gauge on the market today, the Compass MG-36Pro Miter Gauge achieves precise angular settings byeliminating slops. 

Eliminating the slop during angle position

This is achieved with a positive index system consisting of tapered grooves and a spherical locking pin.

The heart of the Compass MG-36Pro Miter Gauge is our unique, positive lock index system. With the use of only two fingers, thetension that keeps the spherical locking pin in place is releasedallowing the miter gauge to pivot, and index, to all of the most common miter angles.

The Compass MG-36Pro allows for quick and positiveadjustments with 0.02 (1/50th) degree! Of course, the MG-36Pro can bemanually set to any other angle you desire.

Extended Miter Bar

The length of the miter bar has been extended to 22” (560mm), providing better support for crosscut guiding. 

The Newly Designed Miter Bar FitnessAdjustment Mechanism

This Newly Designed Miter Bar Fitness Adjustment Mechanism is equipped with five eccentric blocks, effectively eliminating the gap between the miter bar and the T-slot, making adjustments more convenient and sliding smoother.

Positive Stops and Smart Trigger Lock, adding A New Precision Vernier Scale

COMPASS MG-36Pro has 11 Positive Stops: ±60°, ±45°, ±30°, ±22.5°, ±15° and 0°.

The Indexing Pin with the Smart Trigger Lock is released by pressing the button with two fingers. It is fast, accurate and easy!

A new precision vernier scale has been added to improve the accuracy of readings, achieving a precision of 0.1 degrees.

36" Crosscutting Fence

The standard heavy-duty, black anodized crosscutting fence of the MG-36Pro is a CNC milled extrusion of 6061-T6 aluminum. It is the base for the micro-adjustable flip stop.

The whole fence can be moved smoothly and easily by loosening the two knobs.

It can be extended to 36" in length, which is the longest length capacity on the market.

The live center is now made of carbon alloy tool steel.

A precision scale is equipped on the top of the fence. 

Micro-Adjustable Flip Stop
with Unique Elbow Joint

The MG-36Pro Flip Stop Assembly slides in a groove on top of the fence and can be locked anywhere you choose.

An elbow joint has been added to the flip stop, allowing for adjustment of the flip stop's position when installing a sub fence,ensuring a gap-free fit between the flip stop and the sub fence.

For stock without square faces to the table, you can index on the bevel utilizing the Brass Locating Pin. 

Once locked in place, you can make micro adjustments in 0.001" (0.02mm) increments. All graduations are laser etched.Through a redesign, the locking knob on the Flip Stop Assembly has been strategically placed at the center of the entire assembly, greatly boosting the overall stability of the assembly while making adjustments.

Premium Materials and Craftsmanship

The Compass MG-36Pro is designed with longevity in mind. All parts are CNC machined, all aluminum parts are anodized and theremaining components are either made from stainless steel or brass. 

The combination of accurately milled components, propermaterials and finish insures that the MG-36Pro will remain rust free. 

The added rigidity and extraordinary locking strength will provide years of accurate results.

Specifications

Woodworkers Deserve Better Tools!

CUSTOMER TESTIMONIALS

@Andrew Price

I bought a new Alpha HW110LC-36P from Harvey during the father's day sale. I was about to move and the even delayed shipping it to my new address until we officially owned the home. The whole process end to end was fantastic. Their customer service is prompt and incredibly helpful. The saw is AMAZING and I can't wait to start on all the cabinets and beds my wife is expecting me to make. Pardon the mess in the picture, I just moved in 😁

@Joseph Plummer

10" Alpha model HW 110LC-36. I recently purchased this table saw after researching all the top brands and realizing Laguna, Shop Fox, Delta, and Grizzly were all on backorder. I took a chance on Harvey and I am so happy I did, because this table saw it top notch quality for the price. Once I got ghe saw unpacked I realized that the MG-36 miter gauge was not in the boxes. I called customer service and they promptly sent me the missing miter gauge. Customer service is top notch. If you are in the market for a really nice table saw that may not have the brand recognition of the other major brands I cannot recommend Harvey Woodworking enough.

@johnson_woodwork

Thank you @harveywoodworking for correcting my order and sending me the missing miter gauge. In all transparency to those that have been following, it was difficult getting a response from you, but once I did, I had great service from Rayson. Thanks for going above and beyond to make things right. This saw was easy to assemble, well packaged, and I’m finally to the point where I can start putting some miles on it. Due to a lack of time on my part, I haven’t had a chance to run any stock through, but if it operates like it looks to be built, than it should be a solid machine well worth the money.

@Retired Firefighter (Rich)

After a lot of research and comparing table saws I decided to purchase a from Harvey in the fall of 2020. With all of the pandemic issues it took awhile to ship cross country to my home by Harvey’s customer service was there all along keeping me updated. Flash forward to a week ago. My saw would not run. A call to Harvey and I was talking with Danny after only a couple rings of the phone. I describe what was happening and he confirmed my suspicion that the switch had gone bad. This was late on a Friday afternoon west coast time and Danny said they would get a new switch out to me right away. Monday rolled around and I got a call from customer service letting me know the switch shipped. That call was followed up by emails and a text message. The switch arrived a day ahead of schedule and I installed it a couple days later due to other time commitments. It fixed the problem. In my opinion, customer service is top notch at Harvey.

@Tr Stull

Have finally gotten the saw set up and running! Everything suggests I made a great choice. Greatly appreciated the quick response to questions and for replacement parts that were thought to have been lost in shipment. Got the second set of fence rails about the time the original ones showed up! Thank you for the great service!

@Thomas Dugar

First and foremost, Samantha was awesome to work with. She actually answered the phone when i called! Product knowledgeable and professional all the way. She even helped me with an upgrade on the saw i ordered and it was shipped right away. Very satisfied with my experience and plan on posting an unboxing and assembly video to make others aware of how high the quality is of Harvey tools.

@Samuel Hall

Harvey is top notch! They will call you back and send a follow up email to verify! I got my saw at an amazing price for what I got! Harvey is worth the money and they are definitely going to be seeing more mine😁 dont worry if you are thinking about buying, do it and be patient! More than likely they already made a piece of equipment you already own in your shop now!

@Mark Ratliff

Called because I thought my table saw was missing some bolts. Customer Service answered on first ring (by a human), and was extremely helpful. Never questioned that I didn't receive parts, just verified what I was missing, walked through everything to insure I had everything else needed to assemble the saw and said the missing parts would be shipped first thing in the morning. EXCELLENT SERVICE! Had to call back when I found said parts and we had a good laugh. Outstanding! I believe the service persons name was Hung Nguyen. He was Great and I will do more business with Harvey Industries because of this level of service, and the tool is great as well.

@shawn stockford

I am so glad that I stumbled across Harvey Woodworking in my search for a cabinet table saw. I love the saw and the price/value. Amazing people to work with, however, be patient as they are building the business and growing faster than imagined. They will call you back, answer your email, and be able to answer all of your questions.

@Thomas dugar

If the saw performance is as good as the support staff, I will be very happy 😊. I have heard all good things about this company so I am eager to receive and start using this equipment!

Like

@Andy Head

Bought a 4HP Alpha Table Saw from Harvey back in November. Very happy thus far. I had a few technical questions before buying, and a gentleman (first name Hung) gave me a call back with the answers. Mr. Rayson assisted me with the order. Both were quite helpful. Overall customer service was fantastic. If I'm in the market again for an item they manufacture, I will definitely be giving Harvey Industries my consideration.

@Craig L

Bought a new Table Saw from Harvey:

Excellent experience, very friendly customer service team, seems like a company that really wants to provide a great product at an affordable price!

@Thomas dugar

Excellent Customer Service and REALLY, REALLY, impressive products!!! I was recently in the market for a new table saw and discovered the company via an instagram post from an influential and very seasoned woodworker. I wasn't familiar with the company, but after a little research, I discovered that they've been around since 1999 and only recently started selling their saws directly in North America (Important note: For the past 15 years they've been the supplier of saws and machinery for many of the big name US Brands, so this isn't their first Rodeo so to speak). I had a question about one of their saws so I decided to send them an email, and they responded extremely promptly. I had a barrage of additional questions which were all answered courteously and in great detail. This type of service and attention is severely lacking from many of the other brands...Trust me, I reached out to several other manufactures trying to find out more about the table saws they sell for comparison, and in several cases, after a weeks' time, I'm still awaiting a response. With this formula of quality products, priced to deliver incredible value, and a customer service/product support team which actually listens and cares about existing and potential consumers of their products, they have no choice but to be an absolute success! Thank you Harvey Woodworking!!!